Why is my Euro Ddropper not dispensing properly?

February 15, 2016

We often get asked whether or not to shake the Ddrops® bottle to help get the tiny drop out. The answer is simply, no. All of our Ddrops® products contain a patented Euro DdropperTM technology, which allows just one drop of the exact dosage listed on the bottle to be dispensed consistently each and every time, without the need for shaking.

Since the Euro Ddropper TM is built right into the bottle, it creates a self-dispensing dropper that eliminates the need for a measuring spoon, cup, or syringe. In the rare occasion, your EuroDdropper is not dispensing properly, follow these simple steps:

If the drop is coming out too fast:

 

  • The bottle can be tilted slightly on an angle from vertical to slow the speed of the drop
  • To prevent a second drop from coming out, start tilting the bottle at 45 degrees and turning it upright as soon as the drop has been dispensed

 

If the drop is coming out too slow:

 

  • Your bottle of Ddrops might be coming to an end. In the meantime, please be patient. It may be time to purchase a new bottle.
  • If your bottle is still quite new, you may have air trapped inside the bottle. If this happens, do not shake the bottle. Simply put the cap on and gently turn it upside down and right again a few times before use.

 

Please note: When you first receive your Ddrops®, you may notice that there seems to be very little liquid inside the bottle. It is important to always check that the cap’s tamper-evident ring (white ring around the cap of the bottle) has not been opened, as it will detach from the cap when opened. We always ensure that each and every bottle of Ddrops® has at the very least, the exact number of drops listed on the box, insert, and the bottle (most often it is quite a bit more if you were to count the drops). Since each drop of Ddrops® only contains 0.028mL as opposed to a full milliliter, the liquid may seem to be a lot less than other liquid vitamin D products.

If you are more of a visual person, please watch our YouTube video on properly getting the drop out of the Ddrops® bottle:

For instructions on how to dispense Ddrops, click here.

Follow these simple instructions to help get the drop out:

 

  • Simply turn the bottle completely upside down. There is no need to shake the bottle, as the drop will fall out by itself
  • Once you see the drop forming, you know that the drop will fall out shortly
  • Once the drop is dispensed, return the bottle to an upright position and put on the cap
  • Store bottle upright, between 5°C and 30°C, or 40°F and 85°F

กำลังอ่านต่อไปครับ

ทิ้งข้อความไว้

เว็บไซต์นี้ได้รับการคุ้มครองโดย reCAPTCHA และมีการนำนโยบายความเป็นส่วนตัวของ Google และข้อกำหนดในการใช้บริการมาใช้